WhatsApp +34 686 553 771 info@temco6000.com

Service

Concrete repair for columns, beams and slabs

Spalling, exposed reinforcement or cracks in concrete elements. The damage is assessed before deciding whether repair alone is sufficient.

Reinforcement and substrate during preparation · Platja d’Aro
TEMCO 6000 project · Platja d’Aro

TEMCO 6000 projects

The work, step by step

A selection of interventions carried out by TEMCO 6000, with documented stages from each project.

Select a photograph to enlarge it.

Platja d’Aro

Structural repair of a concrete slab

Removal of deteriorated concrete, cleaning and protection of reinforcement, reconstruction with R4 repair mortar and waterproofing treatment.

Reinforcement and substrate during preparation · Platja d’Aro
01 · Work in progressReinforcement and substrate during preparation
Reconstruction with repair mortar · Platja d’Aro
02 · Work in progressReconstruction with repair mortar
Finish of the waterproofing treatment · Platja d’Aro
03 · Documented finishFinish of the waterproofing treatment
Full project case study →

The issue addressed

Reinforced concrete can deteriorate when water and air reach the reinforcement and cause corrosion. As rust expands, it pushes against the concrete cover and can cause spalling.

Repair restores an element's protection and shape. Strengthening increases its capacity and requires technical assessment and calculations. A sound assessment distinguishes between the two.

What needs assessing

  • The affected elements: columns, beams, slab edges, balconies or façades.
  • The extent of damage: rust stains, spalled cover or exposed reinforcement.
  • The condition of the reinforcement: surface corrosion only, or loss of cross-section.
  • The cause: water ingress, insufficient concrete cover, aggressive conditions or impact.
  • Safety: whether fragments could fall onto areas used by people.

Information that helps us prepare a quotation

  • Close-up and wider photos of each affected element.
  • Its location and approximate height, to assess access.
  • The building's approximate age, if known.
  • Previous reports or technical inspections, if available.
  • Previous repairs in the same area.

Common questions

What is the difference between repair and strengthening?

Repair restores the element's protection and geometry. Strengthening increases its load-bearing capacity and requires technical assessment and calculations.

How does the condition of the reinforcement affect the work?

It is a key factor. If corrosion is superficial, repair may be sufficient. If cross-section has been lost, the element may need strengthening, which requires a technical assessment.

What should I do if fragments are falling onto a walkway?

Notify the property manager or owner and assess protective measures as soon as possible. The repair is defined after examining the element.

Would you like us to assess your case?

Send us a description and photos. You can contact us directly or prepare your message using the form on the home page.

You send the message from your own app. This page does not send it.

Other services