WhatsApp +34 686 553 771 info@temco6000.com

Service

Waterproofing pools and water tanks

When a pool or tank loses water, the first step is to establish whether the leak is in the shell or the installations.

Cistern after coating · Talamanca
TEMCO 6000 project · Talamanca

TEMCO 6000 projects

The work, step by step

A selection of interventions carried out by TEMCO 6000, with documented stages from each project.

Select a photograph to enlarge it.

Talamanca

Protecting a rainwater cistern

Cleaning and substrate preparation, mortar repairs and application of two cross coats of flexible waterproofing mortar.

Preparation of substrate and junctions · Talamanca
01 · Work in progressPreparation of substrate and junctions
Application of the waterproof coating · Talamanca
02 · Work in progressApplication of the waterproof coating
Cistern after coating · Talamanca
03 · Documented finishCistern after coating
Full project case study →

Sant Cugat del Vallès

Treating joints and cracks in a pool

Local treatment of joints, cracks and formwork tie holes using resin injection and repair mortars. This project did not include a full coating of the pool shell.

Pool shell before local treatment · Sant Cugat del Vallès
01 · Initial conditionPool shell before local treatment
Joints treated with repair mortars · Sant Cugat del Vallès
02 · Documented finishJoints treated with repair mortars
Full project case study →

The issue addressed

A falling water level does not always mean that the shell is cracked. Pipes, skimmers, lights, wall penetrations or evaporation may account for some or all of the loss.

This page covers the shell and its construction elements: lining, cracks and joints. Hydraulic and filtration installations are a separate area and should be ruled out before work begins.

What needs assessing

  • How the level falls and whether it stops at a particular height.
  • Whether water loss continues when filtration is switched off.
  • The condition of the lining, cracks and shell joints.
  • For a tank, the intended use of the stored water, as this determines materials and requirements.
  • Access and the possibility of emptying the pool shell or tank.

Information that helps us prepare a quotation

  • Whether it is a pool or a tank, its approximate dimensions and the shell material.
  • How far the level falls and over what period, if measured.
  • Photos of the shell, cracks and points where installations pass through it.
  • Previous work and when it was carried out.
  • The tank's use and the town or city.

This information supports an initial assessment. The scope is defined after examining the shell or tank.

Common questions

How do I know whether the shell or the installations are leaking?

A common check is to see whether the level falls at the same rate with filtration switched off and whether it stops at a particular height. If the cause is unclear, a technician should verify it before work begins.

Does the tank's intended use matter?

Yes. The use of the stored water determines the materials and treatment requirements, so please include this in your enquiry.

Does the pool always need to be emptied?

This depends on the type of work and the location of the issue. It is defined after assessing the case.

Would you like us to assess your case?

Send us a description and photos. You can contact us directly or prepare your message using the form on the home page.

You send the message from your own app. This page does not send it.

Other services