WhatsApp +34 686 553 771 info@temco6000.com

Service

Joint sealing and injection treatment for water ingress

When water enters through a joint, crack or junction, the treatment depends on whether the element moves and the nature of the water path.

Application of flexible sealant · Rubí
TEMCO 6000 project · Rubí

TEMCO 6000 projects

The work, step by step

A selection of interventions carried out by TEMCO 6000, with documented stages from each project.

Select a photograph to enlarge it.

Rubí

Sealing an expansion joint

Joint preparation, backing rod installation, priming and flexible sealant application, followed by tooling the finish.

Backing rod and primer · Rubí
01 · Work in progressBacking rod and primer
Application of flexible sealant · Rubí
02 · Work in progressApplication of flexible sealant
Joint after sealing · Rubí
03 · Documented finishJoint after sealing
Full project case study →

The issue addressed

A joint is deliberately provided to accommodate movement. A crack is an unintended split. Both can let water through, but sealing a joint and injecting a crack are different types of work.

A material cannot be chosen from a crack's appearance alone. The element's movement, the amount of water entering, the substrate and the use of the space all matter.

What needs assessing

  • Whether it is an expansion joint, a construction joint or a crack.
  • Whether the element moves due to temperature, loads or settlement, or has stabilised.
  • The extent of water entry: dampness, drips or a continuous flow.
  • The type and condition of the substrate: concrete, masonry or mortar.
  • Access: whether one or both sides can be treated.

Information that helps us prepare a quotation

  • Close-up and wider photos of the joint or crack.
  • Approximate length and location: garage, wall, roof or another space.
  • Whether water enters and under which conditions: after rain or continuously.
  • Whether sealing or injection work has been carried out before, and how it performed.
  • If known, whether the element is structural or part of the building enclosure.

Common questions

Is sealing a joint the same as injecting a crack?

No. Sealing treats a joint designed to accommodate movement. Injection fills a crack or water path within the element. The choice depends on the circumstances of each case.

Is a crack that lets water through a structural problem?

Not necessarily. If its cause or progression is unclear, a technician should assess it before work begins.

Can injection work if the crack is still moving?

This depends on the cause of the movement, which is why it is investigated before choosing a material and method.

Would you like us to assess your case?

Send us a description and photos. You can contact us directly or prepare your message using the form on the home page.

You send the message from your own app. This page does not send it.

Other services