TEMCO 6000 project · Rubí
Sealing an expansion joint in a Rubí car park
Joint preparation, backing rod installation, priming and flexible sealant application, followed by tooling the finish.

Intervention stages
The expansion joint was prepared by removing material and conditioning the contact surfaces. Its geometry and sides were prepared before flexible sealing.
The sequence includes backing rod, primer and flexible sealant application. It distinguishes sealing a moving joint from injecting a water path.
The sealant was tooled to finish the joint. Photographs from the same car park show different points and stages, including the completed seal.
Each building needs its own assessment. This case study describes work carried out on one specific project.


