WhatsApp +34 686 553 771 info@temco6000.com

TEMCO 6000 project · Santa Perpètua de Mogoda

Garage water ingress treatment in Santa Perpètua

Treatment of capping-beam and diaphragm-wall panel joints: resin injection at water paths, removal of unsound material and sealing with repair mortars.

Repaired joints and cleaned area · Santa Perpètua de Mogoda
TEMCO 6000 project · Santa Perpètua de Mogoda

Intervention stages

The work focused on capping-beam and diaphragm-wall panel joints showing dampness and water ingress. Areas needing injection were distinguished from those that could be repaired with mortar.

At water paths, drilled holes and injection packers enabled the application of hydro-expansive resin. Unsound material was then removed and the substrate prepared for technical repair mortars.

Joints were sealed with repair mortars and reinforcing waterproof layers. The sequence distinguishes the water-ingress treatment from the finishing of the parking area.

Dampness at garage joints · Santa Perpètua de Mogoda
Dampness at garage joints
Resin injection into the joint · Santa Perpètua de Mogoda
Resin injection into the joint
Repaired joints and cleaned area · Santa Perpètua de Mogoda
Repaired joints and cleaned area

Each building needs its own assessment. This case study describes work carried out on one specific project.

Tell us about your project